Sewer Repair & Replacement in Studio City

Mr. Pipe Plumbing repairs and replaces sewer lines in Studio City, from one damaged section to the whole run. The method follows the pipe, and a single section can take more than one, as on a main line where our crew combined lining with new ABS piping. What the line is in, and where it can be reached, decides which approaches fit.

  • Based in Studio City, CA
  • CSLB C-36 #1087910
  • Mon–Fri 6 AM–6 PM
  • Sat 7 AM–4 PM
Gloved hand holding a broken section of old sewer pipe above an excavation where a technician works
A broken section of old sewer pipe from an excavated line
Photo not attributed to a specific job.

In Studio City

Who a sewer repair reaches depends on the building

At one Studio City property, our crew repaired a 20‑foot stretch of main line with pipe lining and new ABS piping together. Whether a repair like that touches one household or a whole building depends on what the line serves.

Census Bureau estimates for 2024 split the homes in the Studio City ZIP-code area mainly two ways: about 44% are single-family houses and about 52% sit in buildings of five or more units. In the second group, one main line can carry waste from every unit in a building, so we plan the work with the owner or manager and arrange tenant access through them.

The same 2024 Census data dates about 63% of those homes to before 1980. A build year says nothing certain about whether a sewer line is original or a later replacement, so the repair decision rests on what the accessible sections are in.

Sources U.S. Census Bureau, ACS 2024 5‑year; Mr. Pipe Plumbing Google owner update: Main Sewer Line Repair in Studio City.

Reading the line one stretch at a time

A sewer line's condition can change along its length, so we judge it in stretches. If the damage sits in one part and the pipe on both sides is still serviceable, repairing that part may be enough, and we say plainly that the rest of the line stays as it was. When problems show up at several points, replacing the run comes into the discussion.

Lining goes inside pipe that can still carry a liner. Pipe bursting replaces the old pipe along its existing path, worked from access points. Excavation digs down to the damaged pipe and takes it out, and it remains workable where the other two are ruled out.

Trenchless work is not our default and it is not available on every line. Where it is an option, we say so. Where the condition of the pipe or the access rules it out, we explain why and what the alternative involves.

A few useful answers

For anything else, talk to our office.

Call (310) 866-7715
What makes a sewer line crack or break?

It is rarely a single event. Roots get into joints and small openings and widen them from inside. Ground movement and settling can push sections out of line or split them. A stretch that sags holds standing waste and blocks at the same point. The inside of the pipe can also corrode or roughen until cleaning stops holding. Which of these is happening, and where, shapes the options.

Who do I call about a broken sewer line in Studio City?

A licensed plumbing contractor. Mr. Pipe Plumbing holds a California C‑36 plumbing license, is based in Studio City, and repairs and replaces sewer lines for houses and apartment buildings. Start by telling us where the line backs up, how often it happens, and what has already been tried. That history narrows things down before any pipe is opened up.

Is a sag in my sewer line fixable?

It can be. A section that has dropped holds water and waste, so the line keeps blocking in the same spot, and cleaning clears the blockage without lifting the sag. If the low spot is confined to one stretch and the pipe around it is sound, that stretch can be dug to and replaced. Low spots at several points shift the conversation toward replacing the run.

Roots, grease and the point where repair comes in

LA Sanitation says more than half of sewer backups are caused by tree roots and poured fats, oils and grease.

Grease builds up inside a line, and cleaning is how it comes out. Roots can be cleared the same way, but they get in through joints and small openings in the pipe, and clearing them leaves those openings as they were. When a backup keeps returning to the same spot soon after cleaning, the pipe itself becomes the question, and that is where an assessment for repair or replacement starts.

Know what happens next

  1. Discuss and assess

    Our goal is to identify the cause of the problem and recommend an appropriate repair based on the plumbing condition, accessibility, and scope of work.

  2. Findings and estimate

    We assess the issue, explain our findings, and provide an estimate before any approved work begins.

  3. Work completed and confirmed

    After approved work is completed, we test the repaired or installed plumbing where applicable, explain the completed work, and provide the customer or authorized contact with the appropriate service documentation.

Pricing depends on the plumbing condition, accessibility, materials, and actual scope of work. If additional work is discovered, it will be explained and approved before proceeding.

In our customers’ words

Read more reviews

Reviews of Mr. Pipe Plumbing. These reviews are not attributed to a job in Studio City.

★★★★★Google
“Z is always great and goes above and beyond for our building. He also is very patient with my incessant questions and concerns. He replaced corroded sewer lines and snaked our washer machines.”
Denise SlenskiGoogle Reviews
★★★★★Yelp
“Zlatko was super helpful and accommodating the whole way through! His work is great and his prices are more than fair. He shows up on time, is professional, and he explains everything thoroughly.”
Suzie W.Yelp Reviews

Let’s get it looked at

We provide a scheduled arrival window and communicate if the schedule changes.

Submitting this request does not confirm an appointment. Our office will contact you to confirm availability and scheduling.